misplaced start and finish

HW/timer_button/production/bom.csv

@@ -0,0 +1,29 @@
+Designator,Footprint,Quantity,Value,LCSC Part #
+BZ1,Buzzer_12x9.5RM7.6,1,Buzzer,
+"C1, C10, C11, C12, C17, C2, C4, C5, C6, C7, C8, C9",0805,12,100n,
+"C13, C14",0805,2,1u,
+"C15, C16",0805,2,12p,
+C3,0805,1,10n,
+D1,WSON-6-1EP_3x3mm_P0.95mm,1,TPD3E001DRSR,
+"D10, D11, D12, D3, D4, D5, D6, D7, D8, D9",LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm,10,WS2812B,
+D2,1206,1,LED,
+J1,USB_C_Receptacle_HRO_TYPE-C-31-M-12,1,USB_C_Receptacle_USB2.0_16P,
+J2,PinHeader_1x02_P2.54mm_Vertical,1,Conn_01x02,
+"J3, J8, J9",PinHeader_1x03_P2.54mm_Vertical,3,Conn_01x03,
+J4,PinHeader_1x06_P2.54mm_Vertical,1,Conn_01x06,
+"J5, J6",PinHeader_1x04_P2.54mm_Vertical,2,Conn_01x04,
+J7,PinHeader_2x05_P2.54mm_Vertical,1,Conn_02x05_Odd_Even,
+JP1,SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm,1,Jumper_2_Open,
+"Q1, Q3",SOT-23,2,BSS123T-HF,
+Q2,TSOP-6_1.65x3.05mm_P0.95mm,1,PMN30XPEAX,
+"R1, R7",0805,2,5k1,
+"R10, R11, R12, R13, R15, R2, R4, R8",0805,8,10k,
+R14,0805,1,560R,
+"R3, R9",0805,2,1k,
+"R5, R6",0805,2,27R,
+SW1,SW_Cherry_MX_1.00u_PCB,1,SW_Push,
+"SW2, SW3",SW_SPST_TL3342,2,SW_Push,
+U1,QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm,1,RP2040,
+U2,SOIC-8_5.23x5.23mm_P1.27mm,1,W25Q128JVS,
+U3,SOT-23-5_HandSoldering,1,SP6205EM5-L-3-3,
+Y1,Crystal_SMD_5032-2Pin_5.0x3.2mm,1,12MHz,

HW/timer_button/production/designators.csv

@@ -0,0 +1,66 @@
+BZ1:1
+C1:1
+C10:1
+C11:1
+C12:1
+C13:1
+C14:1
+C15:1
+C16:1
+C17:1
+C2:1
+C3:1
+C4:1
+C5:1
+C6:1
+C7:1
+C8:1
+C9:1
+D1:1
+D10:1
+D11:1
+D12:1
+D2:1
+D3:1
+D4:1
+D5:1
+D6:1
+D7:1
+D8:1
+D9:1
+J1:1
+J2:1
+J3:1
+J4:1
+J5:1
+J6:1
+J7:1
+J8:1
+J9:1
+JP1:1
+Q1:1
+Q2:1
+Q3:1
+R1:1
+R10:1
+R11:1
+R12:1
+R13:1
+R14:1
+R15:1
+R2:1
+R3:1
+R4:1
+R5:1
+R6:1
+R7:1
+R8:1
+R9:1
+REF**:1
+SW1:1
+SW2:1
+SW3:1
+U1:1
+U2:1
+U3:1
+Y1:1

HW/timer_button/production/netlist.ipc

@@ -0,0 +1,353 @@
+P  CODE 00
+P  UNITS CUST 0
+P  arrayDim   N
+317GND              VIA        MD0157PA00X+052283Y-035827X0315Y0000R000S3
+317GND              VIA        MD0157PA00X+053701Y-035827X0315Y0000R000S3
+317GND              VIA        MD0157PA00X+057323Y-029921X0315Y0000R000S3
+317GND              VIA        MD0157PA00X+053307Y-034409X0315Y0000R000S3
+317GND              VIA        MD0157PA00X+054252Y-033622X0315Y0000R000S3
+317+1V1             VIA        MD0157PA00X+056929Y-033701X0315Y0000R000S3
+317GND              VIA        MD0157PA00X+054882Y-044173X0315Y0000R000S3
+317GND              VIA        MD0157PA00X+055433Y-043071X0315Y0000R000S3
+317GND              VIA        MD0157PA00X+061181Y-028425X0315Y0000R000S3
+317NET-(D2-A)       VIA        MD0157PA00X+053189Y-037165X0315Y0000R000S3
+317NET-(D2-A)       VIA        MD0157PA00X+050945Y-036772X0315Y0000R000S3
+317VCC              VIA        MD0157PA00X+061496Y-037083X0315Y0000R000S3
+317/RST             VIA        MD0157PA00X+061969Y-036142X0315Y0000R000S3
+317/RST             VIA        MD0157PA00X+060295Y-041142X0315Y0000R000S3
+317+BATT            VIA        MD0157PA00X+055433Y-046530X0315Y0000R000S3
+317/BUZZ            VIA        MD0157PA00X+062205Y-042520X0315Y0000R000S3
+317/NEOPIXEL        VIA        MD0157PA00X+062598Y-042205X0315Y0000R000S3
+317/NEOPIXEL        VIA        MD0157PA00X+060020Y-048957X0315Y0000R000S3
+317/TX              VIA        MD0157PA00X+066772Y-036540X0315Y0000R000S3
+317/RX              VIA        MD0157PA00X+066494Y-036262X0315Y0000R000S3
+317/NEOPIXEL        VIA        MD0157PA00X+066260Y-035933X0315Y0000R000S3
+317/BUZZ            VIA        MD0157PA00X+065938Y-035706X0315Y0000R000S3
+317/SDA             VIA        MD0157PA00X+065660Y-035428X0315Y0000R000S3
+317/SCL             VIA        MD0157PA00X+065382Y-035149X0315Y0000R000S3
+317NET-(D8-DOUT)    VIA        MD0157PA00X+063848Y-029490X0315Y0000R000S3
+317/CHRG            VIA        MD0157PA00X+051260Y-042520X0315Y0000R000S3
+317NET-(D10-DOUT)   VIA        MD0157PA00X+070080Y-041182X0315Y0000R000S3
+317NET-(D10-DOUT)   VIA        MD0157PA00X+068456Y-041433X0315Y0000R000S3
+317NET-(D10-DIN)    VIA        MD0157PA00X+067879Y-035476X0315Y0000R000S3
+317NET-(D10-DIN)    VIA        MD0157PA00X+067795Y-033622X0315Y0000R000S3
+317NET-(D8-DOUT)    VIA        MD0157PA00X+060079Y-028425X0315Y0000R000S3
+317NET-(D7-DOUT)    VIA        MD0157PA00X+058031Y-029055X0315Y0000R000S3
+317NET-(D7-DOUT)    VIA        MD0157PA00X+058094Y-029780X0315Y0000R000S3
+317NET-(D5-DOUT)    VIA        MD0157PA00X+047638Y-038504X0315Y0000R000S3
+317NET-(D5-DOUT)    VIA        MD0157PA00X+049632Y-037346X0315Y0000R000S3
+317NET-(D4-DOUT)    VIA        MD0157PA00X+050709Y-045197X0315Y0000R000S3
+317NET-(D4-DOUT)    VIA        MD0157PA00X+050235Y-043244X0315Y0000R000S3
+317/BOOT            VIA        MD0157PA00X+052480Y-035118X0315Y0000R000S3
+317NET-(C16-PAD1)   VIA        MD0157PA00X+063071Y-034961X0315Y0000R000S3
+317NET-(U1-XIN)     VIA        MD0157PA00X+063071Y-033465X0315Y0000R000S3
+317VCC              VIA        MD0157PA00X+054252Y-032677X0315Y0000R000S3
+317T-(U1-QSPI_SS)   VIA        MD0157PA00X+054488Y-030157X0315Y0000R000S3
+317T-(U1-QSPI_SS)   VIA        MD0157PA00X+055669Y-030157X0315Y0000R000S3
+317-(U1-QSPI_SD1)   VIA        MD0157PA00X+054961Y-030433X0315Y0000R000S3
+317-(U1-QSPI_SD1)   VIA        MD0157PA00X+055948Y-030436X0315Y0000R000S3
+317GND              VIA        MD0157PA00X+049741Y-038789X0315Y0000R000S3
+317+5V              VIA        MD0157PA00X+049909Y-038433X0315Y0000R000S3
+317NET-(D1-IO2)     VIA        MD0157PA00X+050000Y-039134X0315Y0000R000S3
+317NET-(D1-IO1)     VIA        MD0157PA00X+050000Y-039606X0315Y0000R000S3
+317VCC              VIA        MD0157PA00X+058031Y-032913X0315Y0000R000S3
+317VCC              VIA        MD0157PA00X+057323Y-034316X0315Y0000R000S3
+317+1V1             VIA        MD0157PA00X+056378Y-032874X0315Y0000R000S3
+317+1V1             VIA        MD0157PA00X+055748Y-034316X0315Y0000R000S3
+317VCC              VIA        MD0157PA00X+059372Y-031804X0315Y0000R000S3
+317VCC              VIA        MD0157PA00X+058189Y-031811X0315Y0000R000S3
+317NET-(J9-PIN_3)   VIA        MD0157PA00X+053251Y-036641X0315Y0000R000S3
+317NET-(J9-PIN_2)   VIA        MD0157PA00X+053622Y-036772X0315Y0000R000S3
+317/V_BATT          VIA        MD0157PA00X+054882Y-038110X0315Y0000R000S3
+317/V_BATT          VIA        MD0157PA00X+054862Y-037480X0315Y0000R000S3
+317VCC              VIA        MD0157PA00X+061102Y-038268X0315Y0000R000S3
+317NET-(J8-PIN_2)   VIA        MD0157PA00X+059802Y-036648X0315Y0000R000S3
+317NET-(J8-PIN_3)   VIA        MD0157PA00X+059409Y-036614X0315Y0000R000S3
+317/CHRG            VIA        MD0157PA00X+059329Y-037049X0315Y0000R000S3
+317VCC              VIA        MD0157PA00X+059449Y-033701X0315Y0000R000S3
+317/CS              VIA        MD0157PA00X+061890Y-038268X0315Y0000R000S3
+317/CS              VIA        MD0157PA00X+061890Y-036929X0315Y0000R000S3
+317/MISO            VIA        MD0157PA00X+062283Y-038268X0315Y0000R000S3
+317/MISO            VIA        MD0157PA00X+062283Y-036929X0315Y0000R000S3
+317GND              VIA        MD0394PA00X+059055Y-032756X0787Y0000R000S3
+317/RST             VIA        MD0157PA00X+061614Y-033391X0315Y0000R000S3
+317/SWDIO           VIA        MD0157PA00X+060945Y-033268X0315Y0000R000S3
+317/SWCLK           VIA        MD0157PA00X+061339Y-033110X0315Y0000R000S3
+317VCC              VIA        MD0157PA00X+061890Y-034316X0315Y0000R000S3
+317+1V1             VIA        MD0157PA00X+060000Y-032992X0315Y0000R000S3
+367N/C              REF**       D1260UA00X+062992Y-045669X1260Y0000R000S3
+327GND              C1    -1          A02X+058553Y-038189X0463Y0571R000S1
+327ET-(U1-GPIO24)   C1    -2          A02X+059370Y-038189X0463Y0571R000S1
+327/RST             SW3   -1          A02X+060295Y-041142X0669Y0394R180S1
+327/RST             SW3   -1          A02X+057815Y-041142X0669Y0394R180S1
+327GND              SW3   -2          A02X+057815Y-042638X0669Y0394R180S1
+327GND              SW3   -2          A02X+060295Y-042638X0669Y0394R180S1
+327/BOOT            SW2   -1          A02X+051443Y-033414X0669Y0394R315S1
+327/BOOT            SW2   -1          A02X+053197Y-031660X0669Y0394R315S1
+327GND              SW2   -2          A02X+052139Y-030602X0669Y0394R315S1
+327GND              SW2   -2          A02X+050385Y-032356X0669Y0394R315S1
+327NET-(U1-XIN)     Y1    -1          A01X+063071Y-033504X0787Y0945R090S2
+327NET-(C16-PAD1)   Y1    -2          A01X+063071Y-034961X0787Y0945R090S2
+327+BATT            U3    -1          A02X+056122Y-045748X0614Y0256R270S1
+327GND              U3    -2          A02X+055748Y-045748X0614Y0256R270S1
+327+BATT            U3    -3          A02X+055374Y-045748X0614Y0256R270S1
+327NET-(U3-NC)      U3    -4          A02X+055374Y-044685X0614Y0256R270S1
+327VCC              U3    -5          A02X+056122Y-044685X0614Y0256R270S1
+327T-(U1-QSPI_SS)   U2    -1          A02X+054289Y-029213X0630Y0236R090S1
+327-(U1-QSPI_SD1)   U2    -2          A02X+054789Y-029213X0630Y0236R090S1
+327-(U1-QSPI_SD2)   U2    -3          A02X+055289Y-029213X0630Y0236R090S1
+327GND              U2    -4          A02X+055789Y-029213X0630Y0236R090S1
+327-(U1-QSPI_SD0)   U2    -5          A02X+055789Y-032047X0630Y0236R090S1
+327(U1-QSPI_SCLK)   U2    -6          A02X+055289Y-032047X0630Y0236R090S1
+327-(U1-QSPI_SD3)   U2    -7          A02X+054789Y-032047X0630Y0236R090S1
+327VCC              U2    -8          A02X+054289Y-032047X0630Y0236R090S1
+327VCC              U1    -1          A02X+058031Y-031403X0344Y0079R090S1
+327/TX              U1    -2          A02X+058189Y-031403X0344Y0079R090S1
+327/RX              U1    -3          A02X+058346Y-031403X0344Y0079R090S1
+327/NEOPIXEL        U1    -4          A02X+058504Y-031403X0344Y0079R090S1
+327/BUZZ            U1    -5          A02X+058661Y-031403X0344Y0079R090S1
+327/SDA             U1    -6          A02X+058819Y-031403X0344Y0079R090S1
+327/SCL             U1    -7          A02X+058976Y-031403X0344Y0079R090S1
+327ET-(J7-PIN_10)   U1    -8          A02X+059134Y-031403X0344Y0079R090S1
+327NET-(J7-PIN_8)   U1    -9          A02X+059291Y-031403X0344Y0079R090S1
+327VCC              U1    -10         A02X+059449Y-031403X0344Y0079R090S1
+327NET-(J7-PIN_6)   U1    -11         A02X+059606Y-031403X0344Y0079R090S1
+327NET-(J7-PIN_4)   U1    -12         A02X+059764Y-031403X0344Y0079R090S1
+327NET-(J7-PIN_2)   U1    -13         A02X+059921Y-031403X0344Y0079R090S1
+327NET-(J7-PIN_1)   U1    -14         A02X+060079Y-031403X0344Y0079R090S1
+327NET-(J7-PIN_3)   U1    -15         A02X+060408Y-031732X0079Y0344R090S1
+327NET-(J7-PIN_5)   U1    -16         A02X+060408Y-031890X0079Y0344R090S1
+327NET-(J7-PIN_7)   U1    -17         A02X+060408Y-032047X0079Y0344R090S1
+327NET-(J7-PIN_9)   U1    -18         A02X+060408Y-032205X0079Y0344R090S1
+327GND              U1    -19         A02X+060408Y-032362X0079Y0344R090S1
+327NET-(U1-XIN)     U1    -20         A02X+060408Y-032520X0079Y0344R090S1
+327NET-(U1-XOUT)    U1    -21         A02X+060408Y-032677X0079Y0344R090S1
+327VCC              U1    -22         A02X+060408Y-032835X0079Y0344R090S1
+327+1V1             U1    -23         A02X+060408Y-032992X0079Y0344R090S1
+327/SWCLK           U1    -24         A02X+060408Y-033150X0079Y0344R090S1
+327/SWDIO           U1    -25         A02X+060408Y-033307X0079Y0344R090S1
+327/RST             U1    -26         A02X+060408Y-033465X0079Y0344R090S1
+327/MISO            U1    -27         A02X+060408Y-033622X0079Y0344R090S1
+327/CS              U1    -28         A02X+060408Y-033780X0079Y0344R090S1
+327/CLK             U1    -29         A02X+060079Y-034109X0344Y0079R090S1
+327/MOSI            U1    -30         A02X+059921Y-034109X0344Y0079R090S1
+327NET-(J8-PIN_1)   U1    -31         A02X+059764Y-034109X0344Y0079R090S1
+327NET-(J8-PIN_2)   U1    -32         A02X+059606Y-034109X0344Y0079R090S1
+327VCC              U1    -33         A02X+059449Y-034109X0344Y0079R090S1
+327NET-(J8-PIN_3)   U1    -34         A02X+059291Y-034109X0344Y0079R090S1
+327/CHRG            U1    -35         A02X+059134Y-034109X0344Y0079R090S1
+327ET-(U1-GPIO24)   U1    -36         A02X+058976Y-034109X0344Y0079R090S1
+327NET-(D2-A)       U1    -37         A02X+058819Y-034109X0344Y0079R090S1
+327/V_BATT          U1    -38         A02X+058661Y-034109X0344Y0079R090S1
+327NET-(J9-PIN_1)   U1    -39         A02X+058504Y-034109X0344Y0079R090S1
+327NET-(J9-PIN_2)   U1    -40         A02X+058346Y-034109X0344Y0079R090S1
+327NET-(J9-PIN_3)   U1    -41         A02X+058189Y-034109X0344Y0079R090S1
+327VCC              U1    -42         A02X+058031Y-034109X0344Y0079R090S1
+327VCC              U1    -43         A02X+057702Y-033780X0079Y0344R090S1
+327VCC              U1    -44         A02X+057702Y-033622X0079Y0344R090S1
+327+1V1             U1    -45         A02X+057702Y-033465X0079Y0344R090S1
+327/DN              U1    -46         A02X+057702Y-033307X0079Y0344R090S1
+327/DP              U1    -47         A02X+057702Y-033150X0079Y0344R090S1
+327VCC              U1    -48         A02X+057702Y-032992X0079Y0344R090S1
+327VCC              U1    -49         A02X+057702Y-032835X0079Y0344R090S1
+327+1V1             U1    -50         A02X+057702Y-032677X0079Y0344R090S1
+327-(U1-QSPI_SD3)   U1    -51         A02X+057702Y-032520X0079Y0344R090S1
+327(U1-QSPI_SCLK)   U1    -52         A02X+057702Y-032362X0079Y0344R090S1
+327-(U1-QSPI_SD0)   U1    -53         A02X+057702Y-032205X0079Y0344R090S1
+327-(U1-QSPI_SD2)   U1    -54         A02X+057702Y-032047X0079Y0344R090S1
+327-(U1-QSPI_SD1)   U1    -55         A02X+057702Y-031890X0079Y0344R090S1
+327T-(U1-QSPI_SS)   U1    -56         A02X+057702Y-031732X0079Y0344R090S1
+327GND              U1    -57         A02X+059055Y-032756X1260Y1260R090S1
+367N/C              SW1         D1575UA00X+059055Y-039370X1575Y0000R000S0
+367N/C              SW1         D0669UA00X+057055Y-039370X0669Y0000R000S0
+367N/C              SW1         D0669UA00X+061055Y-039370X0669Y0000R000S0
+317ET-(U1-GPIO24)   SW1   -1    D0591PA00X+060055Y-037370X0866Y0000R000S0
+317GND              SW1   -2    D0591PA00X+057555Y-038370X0866Y0000R000S0
+327/BUZZ            R15   -1          A02X+058425Y-044646X0472Y0551R000S1
+327GND              R15   -2          A02X+059213Y-044646X0472Y0551R000S1
+327NET-(D2-K)       R14   -1          A02X+049055Y-036772X0472Y0551R180S1
+327GND              R14   -2          A02X+048268Y-036772X0472Y0551R180S1
+327VCC              R13   -1          A02X+061102Y-038268X0472Y0551R180S1
+327ET-(U1-GPIO24)   R13   -2          A02X+060315Y-038268X0472Y0551R180S1
+327NET-(Q1-D)       R12   -1          A02X+051496Y-041890X0472Y0551R000S1
+327+5V              R12   -2          A02X+052283Y-041890X0472Y0551R000S1
+327/CHRG            R11   -1          A02X+049134Y-042598X0472Y0551R270S1
+327GND              R11   -2          A02X+049134Y-041811X0472Y0551R270S1
+327/V_BATT          R10   -1          A02X+053465Y-044094X0472Y0551R000S1
+327GND              R10   -2          A02X+054252Y-044094X0472Y0551R000S1
+327/BOOT            R9    -1          A01X+054173Y-035118X0472Y0551R270S2
+327T-(U1-QSPI_SS)   R9    -2          A01X+054173Y-034331X0472Y0551R270S2
+327T-(U1-QSPI_SS)   R8    -1          A01X+055039Y-033465X0472Y0551R270S2
+327VCC              R8    -2          A01X+055039Y-032677X0472Y0551R270S2
+327GND              R7    -1          A02X+051732Y-037402X0472Y0551R090S1
+327NET-(J1-CC2)     R7    -2          A02X+051732Y-038189X0472Y0551R090S1
+327/DP              R6    -1          A02X+052756Y-038898X0472Y0551R180S1
+327NET-(D1-IO2)     R6    -2          A02X+051969Y-038898X0472Y0551R180S1
+327NET-(D1-IO1)     R5    -1          A02X+051969Y-039685X0472Y0551R000S1
+327/DN              R5    -2          A02X+052756Y-039685X0472Y0551R000S1
+327/RST             R4    -2          A01X+061811Y-033465X0472Y0551R090S2
+327VCC              R4    -1          A01X+061811Y-032677X0472Y0551R090S2
+327NET-(C16-PAD1)   R3    -1          A02X+062520Y-033937X0472Y0551R270S1
+327NET-(U1-XOUT)    R3    -2          A02X+062520Y-033150X0472Y0551R270S1
+327+BATT            R2    -1          A02X+051969Y-044094X0472Y0551R000S1
+327/V_BATT          R2    -2          A02X+052756Y-044094X0472Y0551R000S1
+327GND              R1    -1          A02X+051732Y-041181X0472Y0551R270S1
+327NET-(J1-CC1)     R1    -2          A02X+051732Y-040394X0472Y0551R270S1
+327/BUZZ            Q3    -1          A02X+058898Y-046181X0581Y0236R000S1
+327GND              Q3    -2          A02X+058898Y-045433X0581Y0236R000S1
+327NET-(BZ1--)      Q3    -3          A02X+059636Y-045807X0581Y0236R000S1
+327+BATT            Q2    -1          A02X+051843Y-043346X0276Y0201R000S1
+327+BATT            Q2    -2          A02X+051843Y-042972X0276Y0201R000S1
+327NET-(Q1-D)       Q2    -3          A02X+051843Y-042598X0276Y0201R000S1
+327+5V              Q2    -4          A02X+052756Y-042598X0276Y0201R000S1
+327+BATT            Q2    -5          A02X+052756Y-042972X0276Y0201R000S1
+327+BATT            Q2    -6          A02X+052756Y-043346X0276Y0201R000S1
+327/CHRG            Q1    -1          A02X+049970Y-042579X0581Y0236R000S1
+327GND              Q1    -2          A02X+049970Y-041831X0581Y0236R000S1
+327NET-(Q1-D)       Q1    -3          A02X+050709Y-042205X0581Y0236R000S1
+327+5V              JP1   -1          A02X+053543Y-042736X0394Y0197R090S1
+327+BATT            JP1   -2          A02X+053543Y-043248X0394Y0197R090S1
+317NET-(J9-PIN_1)   J9    -1    D0394PA00X+054094Y-037352X0669Y0669R000S0
+317NET-(J9-PIN_2)   J9    -2    D0394PA00X+054094Y-038352X0669Y0669R000S0
+317NET-(J9-PIN_3)   J9    -3    D0394PA00X+054094Y-039352X0669Y0669R000S0
+317NET-(J8-PIN_1)   J8    -1    D0394PA00X+055591Y-039323X0669Y0669R180S0
+317NET-(J8-PIN_2)   J8    -2    D0394PA00X+055591Y-038323X0669Y0669R180S0
+317NET-(J8-PIN_3)   J8    -3    D0394PA00X+055591Y-037323X0669Y0669R180S0
+317NET-(J7-PIN_1)   J7    -1    D0394PA00X+069299Y-038898X0669Y0669R090S0
+317NET-(J7-PIN_2)   J7    -2    D0394PA00X+069299Y-039898X0669Y0669R090S0
+317NET-(J7-PIN_3)   J7    -3    D0394PA00X+068299Y-038898X0669Y0669R090S0
+317NET-(J7-PIN_4)   J7    -4    D0394PA00X+068299Y-039898X0669Y0669R090S0
+317NET-(J7-PIN_5)   J7    -5    D0394PA00X+067299Y-038898X0669Y0669R090S0
+317NET-(J7-PIN_6)   J7    -6    D0394PA00X+067299Y-039898X0669Y0669R090S0
+317NET-(J7-PIN_7)   J7    -7    D0394PA00X+066299Y-038898X0669Y0669R090S0
+317NET-(J7-PIN_8)   J7    -8    D0394PA00X+066299Y-039898X0669Y0669R090S0
+317NET-(J7-PIN_9)   J7    -9    D0394PA00X+065299Y-038898X0669Y0669R090S0
+317ET-(J7-PIN_10)   J7    -10   D0394PA00X+065299Y-039898X0669Y0669R090S0
+317VCC              J6    -1    D0394PA00X+066535Y-041417X0669Y0669R000S0
+317/RX              J6    -2    D0394PA00X+066535Y-042417X0669Y0669R000S0
+317/TX              J6    -3    D0394PA00X+066535Y-043417X0669Y0669R000S0
+317GND              J6    -4    D0394PA00X+066535Y-044417X0669Y0669R000S0
+317GND              J5    -4    D0394PA00X+065118Y-044417X0669Y0669R000S0
+317/SDA             J5    -3    D0394PA00X+065118Y-043417X0669Y0669R000S0
+317/SCL             J5    -2    D0394PA00X+065118Y-042417X0669Y0669R000S0
+317VCC              J5    -1    D0394PA00X+065118Y-041417X0669Y0669R000S0
+317VCC              J4    -1    D0394PA00X+063701Y-036811X0669Y0669R000S0
+317/MOSI            J4    -2    D0394PA00X+063701Y-037811X0669Y0669R000S0
+317/CLK             J4    -3    D0394PA00X+063701Y-038811X0669Y0669R000S0
+317/CS              J4    -4    D0394PA00X+063701Y-039811X0669Y0669R000S0
+317/MISO            J4    -5    D0394PA00X+063701Y-040811X0669Y0669R000S0
+317GND              J4    -6    D0394PA00X+063701Y-041811X0669Y0669R000S0
+317/SWCLK           J3    -1    D0394PA00X+063278Y-029370X0669Y0669R090S0
+317GND              J3    -2    D0394PA00X+062278Y-029370X0669Y0669R090S0
+317/SWDIO           J3    -3    D0394PA00X+061278Y-029370X0669Y0669R090S0
+317+BATT            J2    -1    D0394PA00X+052701Y-044961X0669Y0669R270S0
+317GND              J2    -2    D0394PA00X+053701Y-044961X0669Y0669R270S0
+367N/C              J1          D0256UA00X+050236Y-038232X0256Y0000R270S0
+367N/C              J1          D0256UA00X+050236Y-040508X0256Y0000R270S0
+327GND              J1    -A1         A02X+050805Y-040650X0236Y0571R270S1
+327+5V              J1    -A4         A02X+050805Y-040335X0236Y0571R270S1
+327NET-(J1-CC1)     J1    -A5         A02X+050805Y-039862X0118Y0571R270S1
+327NET-(D1-IO2)     J1    -A6         A02X+050805Y-039469X0118Y0571R270S1
+327NET-(D1-IO1)     J1    -A7         A02X+050805Y-039272X0118Y0571R270S1
+327J1-SBU1-PADA8)   J1    -A8         A02X+050805Y-038878X0118Y0571R270S1
+327+5V              J1    -A9         A02X+050805Y-038406X0236Y0571R270S1
+327GND              J1    -A12        A02X+050805Y-038091X0236Y0571R270S1
+327GND              J1    -B1         A02X+050805Y-038091X0236Y0571R270S1
+327+5V              J1    -B4         A02X+050805Y-038406X0236Y0571R270S1
+327NET-(J1-CC2)     J1    -B5         A02X+050805Y-038681X0118Y0571R270S1
+327NET-(D1-IO2)     J1    -B6         A02X+050805Y-039075X0118Y0571R270S1
+327NET-(D1-IO1)     J1    -B7         A02X+050805Y-039665X0118Y0571R270S1
+327J1-SBU2-PADB8)   J1    -B8         A02X+050805Y-040059X0118Y0571R270S1
+327+5V              J1    -B9         A02X+050805Y-040335X0236Y0571R270S1
+327GND              J1    -B12        A02X+050805Y-040650X0236Y0571R270S1
+317GND              J1    -S1   D0236PA00X+048799Y-041071X0394Y0630R270S0
+317GND              J1    -S1   D0236PA00X+050445Y-041071X0394Y0827R270S0
+317GND              J1    -S1   D0236PA00X+050445Y-037669X0394Y0827R270S0
+317GND              J1    -S1   D0236PA00X+048799Y-037669X0394Y0630R270S0
+327+BATT            D12   -1          A01X+063909Y-047691X0591Y0354R324S2
+327D12-DOUT-PAD2)   D12   -2          A01X+064672Y-048742X0591Y0354R324S2
+327GND              D12   -3          A01X+066233Y-047608X0591Y0354R324S2
+327NET-(D11-DOUT)   D12   -4          A01X+065469Y-046557X0591Y0354R324S2
+327+BATT            D11   -1          A01X+067860Y-043268X0591Y0354R288S2
+327NET-(D11-DOUT)   D11   -2          A01X+069095Y-043669X0591Y0354R288S2
+327GND              D11   -3          A01X+069691Y-041835X0591Y0354R288S2
+327NET-(D10-DOUT)   D11   -4          A01X+068456Y-041433X0591Y0354R288S2
+327+BATT            D10   -1          A01X+068476Y-037311X0591Y0354R252S2
+327NET-(D10-DOUT)   D10   -2          A01X+069711Y-036910X0591Y0354R252S2
+327GND              D10   -3          A01X+069115Y-035075X0591Y0354R252S2
+327NET-(D10-DIN)    D10   -4          A01X+067879Y-035476X0591Y0354R252S2
+327+BATT            D9    -1          A01X+065477Y-032191X0591Y0354R216S2
+327NET-(D10-DIN)    D9    -2          A01X+066241Y-031140X0591Y0354R216S2
+327GND              D9    -3          A01X+064680Y-030006X0591Y0354R216S2
+327NET-(D8-DOUT)    D9    -4          A01X+063917Y-031057X0591Y0354R216S2
+327+BATT            D8    -1          A01X+060024Y-029780X0591Y0354R180S2
+327NET-(D8-DOUT)    D8    -2          A01X+060024Y-028480X0591Y0354R180S2
+327GND              D8    -3          A01X+058094Y-028480X0591Y0354R180S2
+327NET-(D7-DOUT)    D8    -4          A01X+058094Y-029780X0591Y0354R180S2
+327+BATT            D7    -1          A01X+054190Y-031049X0591Y0354R144S2
+327NET-(D7-DOUT)    D7    -2          A01X+053426Y-029998X0591Y0354R144S2
+327GND              D7    -3          A01X+051865Y-031132X0591Y0354R144S2
+327NET-(D6-DOUT)    D7    -4          A01X+052629Y-032183X0591Y0354R144S2
+327+BATT            D6    -1          A01X+050235Y-035484X0591Y0354R108S2
+327NET-(D6-DOUT)    D6    -2          A01X+048999Y-035083X0591Y0354R108S2
+327GND              D6    -3          A01X+048403Y-036917X0591Y0354R108S2
+327NET-(D5-DOUT)    D6    -4          A01X+049639Y-037319X0591Y0354R108S2
+327+BATT            D5    -1          A01X+049639Y-041409X0591Y0354R072S2
+327NET-(D5-DOUT)    D5    -2          A01X+048403Y-041811X0591Y0354R072S2
+327GND              D5    -3          A01X+048999Y-043646X0591Y0354R072S2
+327NET-(D4-DOUT)    D5    -4          A01X+050235Y-043244X0591Y0354R072S2
+327+BATT            D4    -1          A01X+052645Y-046530X0591Y0354R036S2
+327NET-(D4-DOUT)    D4    -2          A01X+051881Y-047581X0591Y0354R036S2
+327GND              D4    -3          A01X+053442Y-048715X0591Y0354R036S2
+327NET-(D3-DOUT)    D4    -4          A01X+054205Y-047663X0591Y0354R036S2
+327+BATT            D3    -1          A01X+058091Y-048957X0591Y0354R000S2
+327NET-(D3-DOUT)    D3    -2          A01X+058091Y-050256X0591Y0354R000S2
+327GND              D3    -3          A01X+060020Y-050256X0591Y0354R000S2
+327/NEOPIXEL        D3    -4          A01X+060020Y-048957X0591Y0354R000S2
+327NET-(D2-A)       D2    -2          A02X+050945Y-036772X0492Y0689R000S1
+327NET-(D2-K)       D2    -1          A02X+049843Y-036772X0492Y0689R000S1
+327NET-(D1-IO1)     D1    -1          A01X+049504Y-039557X0248Y0177R180S2
+327NET-(D1-IO2)     D1    -2          A01X+049504Y-039183X0248Y0177R180S2
+327GND              D1    -3          A01X+049504Y-038809X0248Y0177R180S2
+327-(D1-IO3-PAD4)   D1    -4          A01X+048449Y-038809X0248Y0177R180S2
+327+5V              D1    -5          A01X+048449Y-039183X0248Y0177R180S2
+327N/C              D1    -6          A01X+048449Y-039557X0248Y0177R180S2
+327N/C              D1    -7          A01X+049134Y-039390X0315Y0413R180S2
+327N/C              D1    -7          A01X+048819Y-038976X0315Y0413R180S2
+327N/C              D1    -7          A01X+048819Y-039390X0315Y0413R180S2
+327N/C              D1    -7          A01X+049134Y-038976X0315Y0413R180S2
+327GND              C17   -2          A01X+054252Y-033479X0463Y0571R090S2
+327VCC              C17   -1          A01X+054252Y-032662X0463Y0571R090S2
+327NET-(C16-PAD1)   C16   -1          A01X+064252Y-035290X0463Y0571R270S2
+327GND              C16   -2          A01X+064252Y-034473X0463Y0571R270S2
+327NET-(U1-XIN)     C15   -1          A01X+064252Y-032977X0463Y0571R090S2
+327GND              C15   -2          A01X+064252Y-033794X0463Y0571R090S2
+327GND              C14   -1          A01X+058110Y-035133X0463Y0571R270S2
+327VCC              C14   -2          A01X+058110Y-034316X0463Y0571R270S2
+327GND              C13   -1          A01X+054961Y-035133X0463Y0571R270S2
+327+1V1             C13   -2          A01X+054961Y-034316X0463Y0571R270S2
+327GND              C12   -1          A01X+057323Y-035133X0463Y0571R270S2
+327VCC              C12   -2          A01X+057323Y-034316X0463Y0571R270S2
+327GND              C11   -1          A01X+056535Y-035133X0463Y0571R270S2
+327VCC              C11   -2          A01X+056535Y-034316X0463Y0571R270S2
+327GND              C10   -1          A01X+058583Y-032613X0463Y0571R270S2
+327VCC              C10   -2          A01X+058583Y-031796X0463Y0571R270S2
+327GND              C9    -1          A01X+061102Y-035133X0463Y0571R270S2
+327+1V1             C9    -2          A01X+061102Y-034316X0463Y0571R270S2
+327GND              C8    -1          A01X+055748Y-035133X0463Y0571R270S2
+327+1V1             C8    -2          A01X+055748Y-034316X0463Y0571R270S2
+327GND              C7    -1          A01X+059449Y-035133X0463Y0571R270S2
+327VCC              C7    -2          A01X+059449Y-034316X0463Y0571R270S2
+327GND              C6    -1          A01X+061890Y-035133X0463Y0571R270S2
+327VCC              C6    -2          A01X+061890Y-034316X0463Y0571R270S2
+327VCC              C5    -2          A01X+059370Y-031796X0463Y0571R270S2
+327GND              C5    -1          A01X+059370Y-032613X0463Y0571R270S2
+327VCC              C4    -1          A02X+056220Y-043873X0463Y0571R270S1
+327GND              C4    -2          A02X+056220Y-043056X0463Y0571R270S1
+327NET-(U3-NC)      C3    -1          A02X+055433Y-043873X0463Y0571R270S1
+327GND              C3    -2          A02X+055433Y-043056X0463Y0571R270S1
+327+BATT            C2    -1          A02X+054646Y-045827X0463Y0571R270S1
+327GND              C2    -2          A02X+054646Y-045010X0463Y0571R270S1
+317VCC              BZ1   -1    D0394PA00X+057559Y-045827X0787Y0787R000S0
+317NET-(BZ1--)      BZ1   -2    D0394PA00X+060551Y-045827X0787Y0000R000S0
+999

HW/timer_button/production/positions.csv

@@ -0,0 +1,65 @@
+Designator,Mid X,Mid Y,Rotation,Layer
+BZ1,146.2,-116.4,0.0,top
+C1,149.7625,-97.0,0.0,bottom
+C10,148.8,-81.8,90.0,top
+C11,143.6,-88.2,90.0,top
+C12,145.6,-88.2,90.0,top
+C13,139.6,-88.2,90.0,top
+C14,147.6,-88.2,90.0,top
+C15,163.2,-84.8,270.0,top
+C16,163.2,-88.6,90.0,top
+C17,137.8,-84.0,270.0,top
+C2,138.8,-115.3625,90.0,bottom
+C3,140.8,-110.4,90.0,bottom
+C4,142.8,-110.4,90.0,bottom
+C5,150.8,-81.8,90.0,top
+C6,157.2,-88.2,90.0,top
+C7,151.0,-88.2,90.0,top
+C8,141.6,-88.2,90.0,top
+C9,155.2,-88.2,90.0,top
+D1,124.4,-99.525,180.0,top
+D10,174.74,-91.93,108.0,top
+D11,174.69,-108.08,72.0,top
+D12,165.28,-121.03,36.0,top
+D2,128.0,-93.4,0.0,bottom
+D3,150.0,-126.0,0.0,top
+D4,134.73,-120.96,324.0,top
+D5,125.27,-108.02,288.0,top
+D6,125.27,-91.95,252.0,top
+D7,134.69,-78.97,216.0,top
+D8,150.01,-73.99,180.0,top
+D9,165.3,-78.99,144.0,top
+J1,125.0,-100.0,90.0,bottom
+J2,133.86,-114.2,90.0,top
+J3,160.725,-74.6,270.0,top
+J4,161.8,-93.5,0.0,top
+J5,165.4,-105.2,0.0,top
+J6,169.0,-105.2,0.0,top
+J7,176.02,-98.8,270.0,top
+J8,141.2,-99.88,180.0,top
+J9,137.4,-94.875,0.0,top
+Q1,127.8625,-107.2,0.0,bottom
+Q2,132.84,-109.15,0.0,bottom
+Q3,150.5375,-116.35,0.0,bottom
+R1,131.4,-103.6,90.0,bottom
+R10,136.8,-112.0,0.0,bottom
+R11,124.8,-107.2,90.0,bottom
+R12,131.8,-106.4,0.0,bottom
+R13,154.2,-97.2,180.0,bottom
+R14,123.6,-93.4,180.0,bottom
+R15,149.4,-113.4,0.0,bottom
+R2,133.0,-112.0,0.0,bottom
+R3,158.8,-85.2,90.0,bottom
+R4,157.0,-84.0,270.0,top
+R5,133.0,-100.8,0.0,bottom
+R6,133.0,-98.8,180.0,bottom
+R7,131.4,-96.0,270.0,bottom
+R8,139.8,-84.0,90.0,top
+R9,137.6,-88.2,90.0,top
+SW1,152.54,-94.92,0.0,top
+SW2,131.55,-81.3,45.0,bottom
+SW3,150.0,-106.4,180.0,bottom
+U1,150.0,-83.2,270.0,bottom
+U2,139.8,-77.8,270.0,bottom
+U3,141.6,-114.85,90.0,bottom
+Y1,160.2,-86.95,270.0,top

HW/timer_button/timer_button.kicad_prl

@@ -0,0 +1,77 @@
+{
+  "board": {
+    "active_layer": 0,
+    "active_layer_preset": "",
+    "auto_track_width": false,
+    "hidden_netclasses": [],
+    "hidden_nets": [],
+    "high_contrast_mode": 0,
+    "net_color_mode": 1,
+    "opacity": {
+      "images": 0.6,
+      "pads": 1.0,
+      "tracks": 1.0,
+      "vias": 1.0,
+      "zones": 0.6
+    },
+    "selection_filter": {
+      "dimensions": true,
+      "footprints": true,
+      "graphics": true,
+      "keepouts": true,
+      "lockedItems": false,
+      "otherItems": true,
+      "pads": true,
+      "text": true,
+      "tracks": true,
+      "vias": true,
+      "zones": true
+    },
+    "visible_items": [
+      0,
+      1,
+      2,
+      3,
+      4,
+      5,
+      8,
+      9,
+      10,
+      11,
+      12,
+      13,
+      15,
+      16,
+      17,
+      18,
+      19,
+      20,
+      21,
+      22,
+      23,
+      24,
+      25,
+      26,
+      27,
+      28,
+      29,
+      30,
+      32,
+      33,
+      34,
+      35,
+      36,
+      39,
+      40
+    ],
+    "visible_layers": "ffffdff_ffffffff",
+    "zone_display_mode": 0
+  },
+  "meta": {
+    "filename": "timer_button.kicad_prl",
+    "version": 3
+  },
+  "project": {
+    "files": []
+  }
+}

HW/timer_button/timer_button.kicad_pro

@@ -0,0 +1,492 @@
+{
+  "board": {
+    "3dviewports": [],
+    "design_settings": {
+      "defaults": {
+        "board_outline_line_width": 0.09999999999999999,
+        "copper_line_width": 0.19999999999999998,
+        "copper_text_italic": false,
+        "copper_text_size_h": 1.5,
+        "copper_text_size_v": 1.5,
+        "copper_text_thickness": 0.3,
+        "copper_text_upright": false,
+        "courtyard_line_width": 0.049999999999999996,
+        "dimension_precision": 4,
+        "dimension_units": 3,
+        "dimensions": {
+          "arrow_length": 1270000,
+          "extension_offset": 500000,
+          "keep_text_aligned": true,
+          "suppress_zeroes": false,
+          "text_position": 0,
+          "units_format": 1
+        },
+        "fab_line_width": 0.09999999999999999,
+        "fab_text_italic": false,
+        "fab_text_size_h": 1.0,
+        "fab_text_size_v": 1.0,
+        "fab_text_thickness": 0.15,
+        "fab_text_upright": false,
+        "other_line_width": 0.15,
+        "other_text_italic": false,
+        "other_text_size_h": 1.0,
+        "other_text_size_v": 1.0,
+        "other_text_thickness": 0.15,
+        "other_text_upright": false,
+        "pads": {
+          "drill": 3.2,
+          "height": 3.2,
+          "width": 3.2
+        },
+        "silk_line_width": 0.15,
+        "silk_text_italic": false,
+        "silk_text_size_h": 1.0,
+        "silk_text_size_v": 1.0,
+        "silk_text_thickness": 0.15,
+        "silk_text_upright": false,
+        "zones": {
+          "min_clearance": 0.5
+        }
+      },
+      "diff_pair_dimensions": [
+        {
+          "gap": 0.0,
+          "via_gap": 0.0,
+          "width": 0.0
+        }
+      ],
+      "drc_exclusions": [],
+      "meta": {
+        "version": 2
+      },
+      "rule_severities": {
+        "annular_width": "error",
+        "clearance": "error",
+        "connection_width": "warning",
+        "copper_edge_clearance": "error",
+        "copper_sliver": "warning",
+        "courtyards_overlap": "error",
+        "diff_pair_gap_out_of_range": "error",
+        "diff_pair_uncoupled_length_too_long": "error",
+        "drill_out_of_range": "error",
+        "duplicate_footprints": "warning",
+        "extra_footprint": "warning",
+        "footprint": "error",
+        "footprint_type_mismatch": "ignore",
+        "hole_clearance": "error",
+        "hole_near_hole": "error",
+        "invalid_outline": "error",
+        "isolated_copper": "warning",
+        "item_on_disabled_layer": "error",
+        "items_not_allowed": "error",
+        "length_out_of_range": "error",
+        "lib_footprint_issues": "warning",
+        "lib_footprint_mismatch": "warning",
+        "malformed_courtyard": "error",
+        "microvia_drill_out_of_range": "error",
+        "missing_courtyard": "ignore",
+        "missing_footprint": "warning",
+        "net_conflict": "warning",
+        "npth_inside_courtyard": "ignore",
+        "padstack": "warning",
+        "pth_inside_courtyard": "ignore",
+        "shorting_items": "error",
+        "silk_edge_clearance": "warning",
+        "silk_over_copper": "warning",
+        "silk_overlap": "warning",
+        "skew_out_of_range": "error",
+        "solder_mask_bridge": "error",
+        "starved_thermal": "error",
+        "text_height": "warning",
+        "text_thickness": "warning",
+        "through_hole_pad_without_hole": "error",
+        "too_many_vias": "error",
+        "track_dangling": "warning",
+        "track_width": "error",
+        "tracks_crossing": "error",
+        "unconnected_items": "error",
+        "unresolved_variable": "error",
+        "via_dangling": "warning",
+        "zones_intersect": "error"
+      },
+      "rules": {
+        "max_error": 0.005,
+        "min_clearance": 0.0,
+        "min_connection": 0.0,
+        "min_copper_edge_clearance": 0.0,
+        "min_hole_clearance": 0.25,
+        "min_hole_to_hole": 0.25,
+        "min_microvia_diameter": 0.19999999999999998,
+        "min_microvia_drill": 0.09999999999999999,
+        "min_resolved_spokes": 2,
+        "min_silk_clearance": 0.0,
+        "min_text_height": 0.7999999999999999,
+        "min_text_thickness": 0.08,
+        "min_through_hole_diameter": 0.3,
+        "min_track_width": 0.0,
+        "min_via_annular_width": 0.09999999999999999,
+        "min_via_diameter": 0.5,
+        "solder_mask_clearance": 0.0,
+        "solder_mask_min_width": 0.0,
+        "solder_mask_to_copper_clearance": 0.0,
+        "use_height_for_length_calcs": true
+      },
+      "teardrop_options": [
+        {
+          "td_allow_use_two_tracks": true,
+          "td_curve_segcount": 5,
+          "td_on_pad_in_zone": false,
+          "td_onpadsmd": true,
+          "td_onroundshapesonly": false,
+          "td_ontrackend": false,
+          "td_onviapad": true
+        }
+      ],
+      "teardrop_parameters": [
+        {
+          "td_curve_segcount": 0,
+          "td_height_ratio": 1.0,
+          "td_length_ratio": 0.5,
+          "td_maxheight": 2.0,
+          "td_maxlen": 1.0,
+          "td_target_name": "td_round_shape",
+          "td_width_to_size_filter_ratio": 0.9
+        },
+        {
+          "td_curve_segcount": 0,
+          "td_height_ratio": 1.0,
+          "td_length_ratio": 0.5,
+          "td_maxheight": 2.0,
+          "td_maxlen": 1.0,
+          "td_target_name": "td_rect_shape",
+          "td_width_to_size_filter_ratio": 0.9
+        },
+        {
+          "td_curve_segcount": 0,
+          "td_height_ratio": 1.0,
+          "td_length_ratio": 0.5,
+          "td_maxheight": 2.0,
+          "td_maxlen": 1.0,
+          "td_target_name": "td_track_end",
+          "td_width_to_size_filter_ratio": 0.9
+        }
+      ],
+      "track_widths": [
+        0.0,
+        0.2,
+        0.4
+      ],
+      "via_dimensions": [
+        {
+          "diameter": 0.0,
+          "drill": 0.0
+        }
+      ],
+      "zones_allow_external_fillets": false
+    },
+    "layer_presets": [],
+    "viewports": []
+  },
+  "boards": [],
+  "cvpcb": {
+    "equivalence_files": []
+  },
+  "erc": {
+    "erc_exclusions": [],
+    "meta": {
+      "version": 0
+    },
+    "pin_map": [
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        2,
+        2,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        1,
+        0,
+        1,
+        2
+      ],
+      [
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        1,
+        1,
+        2,
+        1,
+        1,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        1,
+        1,
+        1,
+        1,
+        1,
+        0,
+        1,
+        1,
+        1,
+        1,
+        1,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        1,
+        2,
+        0,
+        0,
+        1,
+        0,
+        2,
+        2,
+        2,
+        2
+      ],
+      [
+        0,
+        2,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        1,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        0,
+        0,
+        2
+      ],
+      [
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2
+      ]
+    ],
+    "rule_severities": {
+      "bus_definition_conflict": "error",
+      "bus_entry_needed": "error",
+      "bus_to_bus_conflict": "error",
+      "bus_to_net_conflict": "error",
+      "conflicting_netclasses": "error",
+      "different_unit_footprint": "error",
+      "different_unit_net": "error",
+      "duplicate_reference": "error",
+      "duplicate_sheet_names": "error",
+      "endpoint_off_grid": "warning",
+      "extra_units": "error",
+      "global_label_dangling": "warning",
+      "hier_label_mismatch": "error",
+      "label_dangling": "error",
+      "lib_symbol_issues": "warning",
+      "missing_bidi_pin": "warning",
+      "missing_input_pin": "warning",
+      "missing_power_pin": "error",
+      "missing_unit": "warning",
+      "multiple_net_names": "warning",
+      "net_not_bus_member": "warning",
+      "no_connect_connected": "warning",
+      "no_connect_dangling": "warning",
+      "pin_not_connected": "error",
+      "pin_not_driven": "error",
+      "pin_to_pin": "warning",
+      "power_pin_not_driven": "error",
+      "similar_labels": "warning",
+      "simulation_model_issue": "ignore",
+      "unannotated": "error",
+      "unit_value_mismatch": "error",
+      "unresolved_variable": "error",
+      "wire_dangling": "error"
+    }
+  },
+  "libraries": {
+    "pinned_footprint_libs": [],
+    "pinned_symbol_libs": []
+  },
+  "meta": {
+    "filename": "timer_button.kicad_pro",
+    "version": 1
+  },
+  "net_settings": {
+    "classes": [
+      {
+        "bus_width": 12,
+        "clearance": 0.2,
+        "diff_pair_gap": 0.25,
+        "diff_pair_via_gap": 0.25,
+        "diff_pair_width": 0.2,
+        "line_style": 0,
+        "microvia_diameter": 0.3,
+        "microvia_drill": 0.1,
+        "name": "Default",
+        "pcb_color": "rgba(0, 0, 0, 0.000)",
+        "schematic_color": "rgba(0, 0, 0, 0.000)",
+        "track_width": 0.25,
+        "via_diameter": 0.8,
+        "via_drill": 0.4,
+        "wire_width": 6
+      }
+    ],
+    "meta": {
+      "version": 3
+    },
+    "net_colors": null,
+    "netclass_assignments": null,
+    "netclass_patterns": []
+  },
+  "pcbnew": {
+    "last_paths": {
+      "gencad": "",
+      "idf": "",
+      "netlist": "",
+      "specctra_dsn": "",
+      "step": "",
+      "vrml": ""
+    },
+    "page_layout_descr_file": ""
+  },
+  "schematic": {
+    "annotate_start_num": 0,
+    "drawing": {
+      "dashed_lines_dash_length_ratio": 12.0,
+      "dashed_lines_gap_length_ratio": 3.0,
+      "default_line_thickness": 6.0,
+      "default_text_size": 50.0,
+      "field_names": [],
+      "intersheets_ref_own_page": false,
+      "intersheets_ref_prefix": "",
+      "intersheets_ref_short": false,
+      "intersheets_ref_show": false,
+      "intersheets_ref_suffix": "",
+      "junction_size_choice": 3,
+      "label_size_ratio": 0.375,
+      "pin_symbol_size": 25.0,
+      "text_offset_ratio": 0.15
+    },
+    "legacy_lib_dir": "",
+    "legacy_lib_list": [],
+    "meta": {
+      "version": 1
+    },
+    "net_format_name": "",
+    "page_layout_descr_file": "",
+    "plot_directory": "",
+    "spice_current_sheet_as_root": false,
+    "spice_external_command": "spice \"%I\"",
+    "spice_model_current_sheet_as_root": true,
+    "spice_save_all_currents": false,
+    "spice_save_all_voltages": false,
+    "subpart_first_id": 65,
+    "subpart_id_separator": 0
+  },
+  "sheets": [
+    [
+      "4c88d864-5558-4972-998d-a249c51e3544",
+      ""
+    ]
+  ],
+  "text_variables": {}
+}

SW/PC/Alkator_count_results.py

@@ -30,8 +30,3 @@ for id in data_dict:
 print(results)
 dict(sorted(results.items(), key=lambda item: item[0]))
 print(results)
-
-    
-
-    
-        

SW/PC/Stopwatch/config.json

@@ -0,0 +1,7 @@
+{
+    "station_id": 2,
+    "host": "https://beta.alkator.cz",
+    "login": "station_register@alkator.cz",
+    "password": "password_heslo",
+    "countdown_seconds": 60
+}

SW/PC/Stopwatch/log.json

@@ -0,0 +1 @@
+[]

SW/PC/Stopwatch/main.py

@@ -0,0 +1,205 @@
+import gi
+import threading
+import time
+import datetime
+import requests
+import json
+
+gi.require_version('Gtk', '4.0')
+from queue import Queue
+from gi.repository import Gtk, Gio, Gdk
+from requests.adapters import HTTPAdapter, Retry
+from usbcardreader import UsbCardReader
+
+
+with open('config.json', 'r') as f:
+    config = json.load(f)
+
+
+activeCards = []
+
+TIME = config['countdown_seconds']
+
+db = {}
+
+queue_to_send = []
+
+
+session = requests.Session()
+
+
+retries = Retry(total=10,
+                backoff_factor=1,
+                status_forcelist=[ 500, 502, 503, 504 ])
+
+session.mount('https://', HTTPAdapter(max_retries=retries))
+
+
+session.post(config['host'] + '/api/login', {'email':config['login'], 'password': config['password']})
+
+def refreshDb():
+    global db
+    resp = session.get(config['host'] + '/api/racers')
+    if resp.status_code == 200:
+        json = resp.json()
+        db = {}
+        for racer in json:
+            if racer["card_id"]:
+                db[racer["card_id"]] = racer
+
+
+def refreshDbEvery3mins():
+    while True:
+        refreshDb()
+        time.sleep(3 * 60)
+
+
+threading.Thread(target=refreshDbEvery3mins).start()
+
+log = []
+
+
+with open('log.json', 'r') as f:
+    log = json.loads(f.read())
+
+
+queue = Queue()
+
+
+def worker():
+    while True:
+        item = queue.get()
+        log.append(item)
+        with open('log.json', 'w') as f:
+            f.write(json.dumps(log))
+        response = session.post(item['url'], json=item['json'])
+        print(item, response)
+
+
+threading.Thread(target=worker).start()
+
+
+def callbackOnCard(card_id):
+    global win, activeCards, db
+    if card_id not in db:
+        refreshDb()
+    if card_id in db:
+        if card_id not in activeCards:
+            activeCards.append(card_id)
+            win.arb(db[card_id])
+            print('Card is active now')
+        else:
+            print('Card is already active')
+    else:
+        print(f'Card {card_id} not found in db')
+
+
+class GridRow():
+    def __init__(self, parent, racer, index):
+        global queue_to_send
+        self.id = racer['starting_number']
+        self.parent = parent
+
+        self.grid = Gtk.Grid()
+
+        if index % 2 == 0:
+            self.grid.set_name("lightgrid")
+        else:
+            self.grid.set_name("darkgrid")
+
+        self.runid = Gtk.Label(label=str(racer["starting_number"]), name="gridlabel")
+        self.runid.set_justify(2)
+        self.runid.set_width_chars(10)
+
+        self.runb = Gtk.Label(label='00:00', name="gridlabel")
+        self.runb.set_hexpand(1)
+
+        self.grid.attach(self.runid, 0, 0, 1, 1)
+        self.grid.attach(self.runb, 1, 0, 1, 1)
+
+        parent.grid.attach(self.grid, 0, index, 2, 1)
+
+        countdown=threading.Thread(target=self.updateTime)
+        countdown.start()
+
+        queue.put({'url': config['host'] + '/api/station/register', 'json': {
+            'card_id': racer['card_id'],
+            'station_id': config['station_id'],
+            'time': datetime.datetime.now().strftime('%d.%m.%Y %H:%M:%S.%f')
+        }})
+
+    def printIndex(self, button):
+        print(self.index)
+
+    def updateTime(self):
+        t = TIME
+        while t >= -10:
+            if t < 0:
+                mins, secs = divmod((t * -1), 60)
+                timer = '-{:02d}:{:02d}'.format(mins, secs)
+            else:
+                mins, secs = divmod(t, 60)
+                timer = '{:02d}:{:02d}'.format(mins, secs)
+            self.runb.set_label(timer)
+            time.sleep(1)
+            t -= 1
+            if t == 10:
+                if self.grid.get_name() == "lightgrid":
+                    self.grid.set_name("lredgrid")
+                else:
+                    self.grid.set_name("dredgrid")
+
+        GridWindow.remRow(self.parent)
+
+class GridWindow(Gtk.ApplicationWindow):
+    def __init__(self, **kargs):
+        super().__init__(**kargs, title='Alkator Clock')
+
+        css_provider = Gtk.CssProvider()
+        css_provider.load_from_file(Gio.File.new_for_path("style.css"))
+        Gtk.StyleContext.add_provider_for_display(Gdk.Display.get_default(), css_provider, Gtk.STYLE_PROVIDER_PRIORITY_APPLICATION)
+
+        runlabel = Gtk.Label(label="ID", name="gridlabel")
+        runlabel.set_justify(2)
+        cntlabel = Gtk.Label(label="Countdown", name="gridlabel")
+        cntlabel.set_justify(2)
+
+        self.runners = []
+
+        self.grid = Gtk.Grid()
+        self.grid.attach(runlabel, 0, 0, 1, 1)
+        self.grid.attach(cntlabel, 1, 0, 2, 1)
+
+        self.set_child(self.grid)
+
+    def arb(self, racer):
+        self.runners.append(GridRow(self, racer, len(activeCards)))
+
+    def rrb(self, button):
+        self.remRow()
+
+    def addRow(self, runner, index):
+        runid = Gtk.Label(label=str(runner))
+        runb = Gtk.Button(label='time_placeholder')
+
+        self.grid.attach(runid, 0, index, 1, 1)
+        self.grid.attach(runb, 1, index, 1, 1)
+
+    def remRow(self):
+        global activeCards
+        if len(activeCards) > 0:
+            self.grid.remove_row(1)
+            del activeCards[0]
+
+
+def on_activate(app):
+    # Create window
+    global win
+    win = GridWindow(application=app)
+    win.present()
+
+UsbCardReader(callbackOnCard)
+app = Gtk.Application(application_id='com.example.App')
+app.connect('activate', on_activate)
+
+app.run(None)

SW/PC/Stopwatch/people.json

@@ -0,0 +1,4 @@
+{
+    "1": 3619716179,
+    "2": 3620062547
+}

SW/PC/Stopwatch/registrace.py

@@ -0,0 +1,184 @@
+import sys
+import datetime
+import requests
+import threading
+import json
+from PyQt6 import QtWidgets, uic, QtGui, QtCore
+from PyQt6.QtCore import pyqtSignal as Signal, pyqtSlot as Slot
+from queue import Queue
+
+from requests.adapters import HTTPAdapter, Retry
+from usbcardreader import UsbCardReader
+
+app = QtWidgets.QApplication(sys.argv)
+
+with open('config.json', 'r') as f:
+    config = json.load(f)
+
+session = requests.Session()
+session.post(config['host'] + '/api/login', {'email':config['login'], 'password': config['password']})
+
+
+retries = Retry(total=10,
+                backoff_factor=1,
+                status_forcelist=[ 500, 502, 503, 504 ],)
+
+session.mount('https://', HTTPAdapter(max_retries=retries))
+
+
+last_card = 0
+last_time = datetime.datetime.now()
+
+racers = []
+
+log = []
+
+
+with open('log.json', 'r') as f:
+    log = json.loads(f.read())
+
+
+queue = Queue()
+
+
+class Worker(QtCore.QThread):
+    returned_state = Signal(str)
+    def __init__(self):
+        super().__init__()
+        self.returned_state.connect(self.handle_returned_state)
+        self.worker_thread = threading.Thread(target=self.worker)
+        self.worker_thread.start()
+
+    def worker(self):
+        while True:
+            item = queue.get()
+            log.append({
+                'url': item['url'],
+                'json': item['json'],
+            })
+            with open('log.json', 'w') as f:
+                f.write(json.dumps(log))
+            response = session.post(item['url'], json=item['json'])
+            if response.status_code == 200:
+                if item.get('on_success'):
+                    item['on_success']()
+                if item.get('message'):
+                    self.returned_state.emit(f'{item['message']}')
+            else:
+                if item.get('failed'):
+                    self.returned_state.emit(f'{item['failed']}')
+
+            print(item, response)
+    def handle_returned_state(self, state):
+        mb = QtWidgets.QMessageBox(text=f"{state}")
+        mb.exec()
+
+
+worker = Worker()
+
+
+def register_racer():
+    card_id = last_card
+    index = window.racers.currentIndex()
+    if not index.data():
+        mb = QtWidgets.QMessageBox(text='Prosím vyberte závodníka!')
+        mb.exec()
+        return
+    racer_id = int(index.data().split(' ')[-1])
+    try:
+        starting_number = max(filter(lambda r: r['starting_number'], racers), key=lambda racer: racer['starting_number'])['starting_number'] + 1
+    except ValueError:
+        starting_number = 1
+    racer = list(filter(lambda x: x['racer_id'] == racer_id, racers))[0]
+
+    def register_update_racer():
+        racer['card_id'] = card_id
+        racer['starting_number'] = starting_number
+        racer['started'] = False
+        updateRacers()
+
+    queue.put({
+        'url': config['host'] + '/api/card/register',
+        'json': {'racer_id': racer_id, 'starting_number': starting_number, 'card_id': card_id, 'time': datetime.datetime.now().strftime('%d.%m.%Y %H:%M:%S.%f')},
+        'message': f"Úspěšné zaregistrování závodníka {racer['first_name']} {racer['last_name']} se startovním číslem {starting_number}!",
+        'failed': f"Neúspěšná registrace závodníka {racer['first_name']} {racer['last_name']}",
+        'on_success': register_update_racer,
+    })
+
+
+model = QtGui.QStandardItemModel()
+
+def updateRacers():
+    model.clear()
+    for racer in racers:
+        if racer['starting_number'] or racer['card_id']:
+            continue
+        item = QtGui.QStandardItem(f"{racer['last_name']} {racer['first_name']} {racer['date_of_birth']} {racer['racer_id']}")
+        model.appendRow(item)
+
+
+updateRacers()
+
+
+def reload_racers():
+    global racers
+    response = session.get(config['host'] + '/api/racers')
+
+    racers = response.json()
+    updateRacers()
+
+
+reload_racers()
+
+
+def findByCard(card_id):
+    for racer in racers:
+        if racer['card_id'] == card_id:
+            return racer
+
+
+def updateLastCard(card_id):
+    global last_card, last_time
+    if card_id == last_card and datetime.datetime.now() - last_time < datetime.timedelta(seconds=15):
+        return
+    time = last_time = datetime.datetime.now()
+    last_card = card_id
+    window.lastCard.setText(str(card_id))
+
+    racer = findByCard(card_id)
+    if racer:
+        if racer['started']:
+            def finish_update_racer():
+                racer['card_id'] = None
+            queue.put({
+                'url': config['host'] + '/api/card/unregister',
+                'json': {'racer_id': racer['racer_id'], 'starting_number': racer['starting_number'], 'card_id': card_id, 'time': time.strftime('%d.%m.%Y %H:%M:%S.%f')},
+                'message': f"Úspěšné odhlášení závodníka {racer['starting_number']}!",
+                'failed': f"Neúspěšné odhlášení karty závodníka {racer['starting_number']}",
+                'on_success': finish_update_racer,
+            })
+        else:
+            def start_update_racer():
+                racer['started'] = True
+            queue.put({
+                'url': config['host'] + '/api/station/register',
+                'json': {'card_id': card_id, 'time': time.strftime('%d.%m.%Y %H:%M:%S.%f'), 'station_id': 1},
+                'message': f"Úspěšné odstartování závodníka {racer['starting_number']}!",
+                'failed': f"Núspěšné odstartování závodníka {racer['starting_number']}, prosím registraci opakujte!",
+                'on_success': start_update_racer,
+            })
+
+
+UsbCardReader(updateLastCard)
+
+
+
+
+window = uic.loadUi("registrace.ui")
+window.racers.setModel(model)
+window.register_racer.clicked.connect(register_racer)
+window.reload_racers.clicked.connect(reload_racers)
+window.show()
+
+
+app.exec()

SW/PC/Stopwatch/registrace.ui

@@ -0,0 +1,61 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<ui version="4.0">
+ <class>Frame</class>
+ <widget class="QFrame" name="Frame">
+  <property name="geometry">
+   <rect>
+    <x>0</x>
+    <y>0</y>
+    <width>315</width>
+    <height>289</height>
+   </rect>
+  </property>
+  <property name="windowTitle">
+   <string>Registrace závodníků</string>
+  </property>
+  <layout class="QGridLayout" name="gridLayout">
+   <item row="4" column="0">
+    <spacer name="verticalSpacer">
+     <property name="orientation">
+      <enum>Qt::Orientation::Vertical</enum>
+     </property>
+     <property name="sizeHint" stdset="0">
+      <size>
+       <width>20</width>
+       <height>40</height>
+      </size>
+     </property>
+    </spacer>
+   </item>
+   <item row="0" column="0">
+    <widget class="QPushButton" name="register_racer">
+     <property name="text">
+      <string>Registrovat</string>
+     </property>
+    </widget>
+   </item>
+   <item row="2" column="0">
+    <widget class="QLineEdit" name="lastCard"/>
+   </item>
+   <item row="1" column="0">
+    <widget class="QLabel" name="label_2">
+     <property name="text">
+      <string>číslo karty</string>
+     </property>
+    </widget>
+   </item>
+   <item row="0" column="1" rowspan="5">
+    <widget class="QListView" name="racers"/>
+   </item>
+   <item row="3" column="0">
+    <widget class="QPushButton" name="reload_racers">
+     <property name="text">
+      <string>Obnovit Závodníky</string>
+     </property>
+    </widget>
+   </item>
+  </layout>
+ </widget>
+ <resources/>
+ <connections/>
+</ui>

SW/PC/Stopwatch/rfid_read.py

@@ -0,0 +1,51 @@
+import usb.core
+import usb.util
+import time
+import requests
+import json
+
+USB_IF      = 0 # Interface
+USB_TIMEOUT = 5 # Timeout in MS
+USB_VENDOR  = 0xffff # Vendor-ID:
+USB_PRODUCT = 0x0035 # Product-ID
+
+# Find the HID device by vender/product ID
+dev = usb.core.find(idVendor=USB_VENDOR, idProduct=USB_PRODUCT)
+
+# Get and store the endpoint
+endpoint = dev[0][(0,0)][0]
+
+if dev.is_kernel_driver_active(USB_IF) is True:
+    dev.detach_kernel_driver(USB_IF)
+
+# Claim the device
+usb.util.claim_interface(dev, USB_IF)
+
+receivedNumber = 0
+while True:
+    control = None
+
+    try:
+        # Read a character from the device
+        control = dev.read(endpoint.bEndpointAddress, endpoint.wMaxPacketSize, USB_TIMEOUT)
+        # Here you have to analyze what's coming in.
+        # In my case you had to check the first byte (command)
+        if (control[2] != 40) & (control[2] != 0):
+            # Convert ascii to a number, there's probably better ways to do so.
+            receivedDigit = control[2] - 29
+
+            if receivedDigit == 10:
+                receivedDigit = 0
+
+            # Append the digit to the number
+            receivedNumber = 10 * receivedNumber + receivedDigit
+
+        # Check if the received character is CRLF
+        if (( control[0] == 0 )) & (( control[2] == 40 )) & (( not receivedNumber == 0 )):
+            print('cardNumber:', receivedNumber)
+    except KeyboardInterrupt:
+        exit()
+    except:
+        pass
+
+    time.sleep(0.001) # Let CTRL+C actually exit

SW/PC/Stopwatch/run.sh

@@ -0,0 +1,2 @@
+#!/bin/bash
+GTK_THEME=Adwaita:light python ./main.py

SW/PC/Stopwatch/start_finish_stopwatch.py

@@ -0,0 +1,110 @@
+import threading
+import time
+import usb.core
+import usb.util
+import requests
+import json
+import datetime
+
+DEBUG = False
+
+if DEBUG == True:
+    index = 2
+else:
+    index = 1
+activeCards = []
+
+TIME = 600
+
+USB_IF      = 0 # Interface
+USB_TIMEOUT = 5 # Timeout in ms
+USB_VENDOR  = 0xffff # Vendor-ID:
+USB_PRODUCT = 0x0035 # Product-ID
+
+with open('people.json', 'r') as f:
+    db = json.load(f)
+
+try:
+    times = {}
+    with open('times.json', 'r') as f:
+        times_json = json.load(f)
+    for i in times_json:
+        times[i] = {}
+        times[i]['start'] = datetime.datetime.strptime(times_json[i]['start'],"%d/%m/%Y, %H:%M:%S")
+        try:
+            times[i]['end'] = datetime.datetime.strptime(times_json[i]['end'],"%d/%m/%Y, %H:%M:%S")
+            times[i]['duration'] = times[i]['end'] - times[i]['start']
+        except:
+            print(i, "Not finished yet")
+    print(times)
+except Exception as e: print(e)
+#except:
+#    times = {}
+#    times_json = {}
+
+class UsbCardReader():
+    def __init__(self, **kargs):
+        # Find the HID device by vendor/product ID
+        self.dev = usb.core.find(idVendor=USB_VENDOR, idProduct=USB_PRODUCT)
+        # Get and store the endpoint
+        self.endpoint = self.dev[0][(0,0)][0]
+        if self.dev.is_kernel_driver_active(USB_IF) is True:
+            self.dev.detach_kernel_driver(USB_IF)
+        # Claim the device
+        usb.util.claim_interface(self.dev, USB_IF)
+        self.receivedNumber = 0
+
+        cardread=threading.Thread(target=self.read)
+        cardread.start()
+
+    def read(self):
+        global activeCards, db, times, times_json
+
+        print("Waiting for card")
+        receivedNumber = 0
+
+        while True:
+            control = None
+            try:
+                control = self.dev.read(self.endpoint.bEndpointAddress, self.endpoint.wMaxPacketSize, USB_TIMEOUT)
+                if (control[2] != 40) & (control[2] != 0):
+                    receivedDigit = control[2] - 29
+                    if receivedDigit == 10:
+                        receivedDigit = 0
+                    receivedNumber = 10 * receivedNumber + receivedDigit
+
+                if (( control[0] == 0 )) & (( control[2] == 40 )) & (( not receivedNumber == 0 )):
+                    try:
+                        with open('people.json', 'r') as f:
+                            db = json.load(f)
+                        for i in db:
+                            if db[i] == receivedNumber:
+                                print("Runner:", i)
+                                print(db)
+                                runner_found = False
+                                for j in times:
+                                    if j == i:
+                                        runner_found = True
+                                        times[j]['end'] = datetime.datetime.now()
+                                        times[j]['duration'] = times[j]['end'] - times[j]['start']
+                                        times_json[j]['end'] = times[j]['end'].strftime("%d/%m/%Y, %H:%M:%S")
+                                        times_json[j]['duration'] = str(times[j]['duration'])
+                                if runner_found == False:
+                                    times[i] = {}
+                                    times[i]['start'] = datetime.datetime.now()
+                                    times_json[i] = {}
+                                    times_json[i]['start'] = times[i]['start'].strftime("%d/%m/%Y, %H:%M:%S")
+                                with open("times.json", 'w') as f:
+                                    f.write(json.dumps(times_json, indent = 4))
+                                print(times)
+                    except Exception as e: print(e)
+                    receivedNumber = 0
+
+            except KeyboardInterrupt:
+                exit()
+            except:
+                pass
+
+            time.sleep(0.001)
+
+UsbCardReader()

SW/PC/Stopwatch/style.css

@@ -0,0 +1,20 @@
+#lightgrid {
+    background-color: #F0F0F0;
+}
+
+#darkgrid {
+    background-color: #D0D0D0;
+}
+
+#lredgrid {
+    background-color: #FF8888;
+}
+
+#dredgrid {
+    background-color: #FF6666;
+}
+
+#gridlabel {
+    font-size: 16pt;
+    font-weight: bold;
+}

SW/PC/Stopwatch/times.json

@@ -0,0 +1,12 @@
+{
+    "1": {
+        "start": "25/02/2025, 18:06:16",
+        "end": "25/02/2025, 18:06:31",
+        "duration": "0:00:14.553644"
+    },
+    "2": {
+        "start": "25/02/2025, 18:15:08",
+        "end": "25/02/2025, 18:15:27",
+        "duration": "0:00:19.543765"
+    }
+}

SW/PC/Stopwatch/usbcardreader.py

@@ -0,0 +1,52 @@
+import usb.core
+import usb.util
+import threading
+import time
+
+
+USB_IF      = 0 # Interface
+USB_TIMEOUT = 5 # Timeout in ms
+USB_VENDOR  = 0xffff # Vendor-ID:
+USB_PRODUCT = 0x0035 # Product-ID
+
+
+class UsbCardReader:
+    def __init__(self, callback):
+        #fn called on found card
+        self.callback = callback
+        # Find the HID device by vendor/product ID
+        self.dev = usb.core.find(idVendor=USB_VENDOR, idProduct=USB_PRODUCT)
+        # Get and store the endpoint
+        self.endpoint = self.dev[0][(0,0)][0]
+        if self.dev.is_kernel_driver_active(USB_IF) is True:
+            self.dev.detach_kernel_driver(USB_IF)
+        # Claim the device
+        usb.util.claim_interface(self.dev, USB_IF)
+        self.receivedNumber = 0
+
+        cardread=threading.Thread(target=self.read)
+        cardread.start()
+
+    def read(self):
+        receivedNumber = 0
+
+        while True:
+            control = None
+            try:
+                control = self.dev.read(self.endpoint.bEndpointAddress, self.endpoint.wMaxPacketSize, USB_TIMEOUT)
+                if (control[2] != 40) and (control[2] != 0):
+                    receivedDigit = control[2] - 29
+                    if receivedDigit == 10:
+                        receivedDigit = 0
+                    receivedNumber = 10 * receivedNumber + receivedDigit
+
+                if ( control[0] == 0 ) and ( control[2] == 40 ) and ( not receivedNumber == 0 ):
+                    self.callback(receivedNumber)
+                    receivedNumber = 0
+            except KeyboardInterrupt:
+                exit()
+            except:
+                receivedNumber = 0
+                pass
+
+            time.sleep(0.001)

SW/PC/Stopwatch/zapis_zavodniku.py

@@ -0,0 +1,84 @@
+import time
+import usb.core
+import usb.util
+import requests
+import json
+import threading
+
+USB_IF      = 0 # Interface
+USB_TIMEOUT = 5 # Timeout in ms
+USB_VENDOR  = 0xffff # Vendor-ID:
+USB_PRODUCT = 0x0035 # Product-ID
+
+activeCards = {}
+
+try:
+    with open('people.json', 'r') as f:
+        activeCards = json.load(f)
+except:
+    print("No people.json found")
+
+class UsbCardReader():
+    def __init__(self, **kargs):
+        # Find the HID device by vendor/product ID
+        self.dev = usb.core.find(idVendor=USB_VENDOR, idProduct=USB_PRODUCT)
+        # Get and store the endpoint
+        self.endpoint = self.dev[0][(0,0)][0]
+        if self.dev.is_kernel_driver_active(USB_IF) is True:
+            self.dev.detach_kernel_driver(USB_IF)
+        # Claim the device
+        usb.util.claim_interface(self.dev, USB_IF)
+        self.receivedNumber = 0
+
+    def read(self):
+        global activeCards
+
+        print("Priloz kartu")
+
+        while True:
+            control = None
+            try:
+                control = self.dev.read(self.endpoint.bEndpointAddress, self.endpoint.wMaxPacketSize, USB_TIMEOUT)
+                if (control[2] != 40) & (control[2] != 0):
+                    receivedDigit = control[2] - 29
+                    if receivedDigit == 10:
+                        receivedDigit = 0
+                    self.receivedNumber = 10 * self.receivedNumber + receivedDigit
+
+                if (( control[0] == 0 )) & (( control[2] == 40 )) & (( not self.receivedNumber == 0 )):
+                    try:
+                        cardPresent = False
+                        for i in activeCards:
+                            if activeCards[i] == self.receivedNumber:
+                                cardPresent = True
+                                break
+                        if cardPresent == False:
+                            assign=threading.Thread(target=self.assign)
+                            assign.start()
+                        else:
+                            print("Naramek jiz zaregistrovan")
+                            self.receivedNumber = 0
+                            print("Priloz kartu")
+                    except Exception as e: print(e)
+
+            except KeyboardInterrupt:
+                exit()
+            except:
+                pass
+
+            time.sleep(0.001)
+
+    def assign(self):
+        global activeCards
+
+        n = input("Cislo zavodnika: ")
+        activeCards[str(n)] = self.receivedNumber
+        with open('people.json', 'w') as f:
+            f.write(json.dumps(activeCards, indent = 4))
+            self.receivedNumber = 0
+        print("Ulozeno, priloz kartu")
+
+if __name__ == "__main__":
+    reader = UsbCardReader()
+    print("Zapis zavodniku ready")
+    reader.read()

SW/PC/main.py

@@ -90,7 +90,6 @@ def main():
     elif rw == '':
         s.write('r\r'.encode())
         read(s)
-        
     else:
         print('Invalid option')
 

SW/RPi_Pico_Button/main.py

@@ -11,7 +11,9 @@ BRIGHTNESS = 0.2  # Adjust the brightness (0.0 - 1.0)
 
 led_strip = neopixel.NeoPixel(Pin(ws_pin), led_num)
 
-push_button = Pin(24,Pin.IN,Pin.PULL_UP)
+push_button = Pin(24, Pin.IN, Pin.PULL_UP)
+buzzer = Pin(3, Pin.OUT)
+led = Pin(25, Pin.OUT)
 
 pushbutton_pressed = 0
 blink_interrupted = 0
@@ -80,19 +82,24 @@ def blink_and_beep(times):
     blink_delay = 0.2
 
     #insert beep
+    buzzer.value(1)
     for i in range(0, times):
         set_neopixel_color(255, 0, 0)
+        buzzer.value(0)
         time.sleep(blink_delay)
         set_neopixel_color(0, 0, 0)
+        buzzer.value(1)
         time.sleep(blink_delay)
         if pushbutton_pressed == 1:
             pushbutton_pressed = 0
             blink_interrupted = 1
             i = times
+            buzzer.value(0)
             return
+    buzzer.value(0)
 
 ten_min_timer = 0
-ten_min_timer_led_index = 0
+ten_min_timer_led_index = 11
 def count_10_min():
     global ten_min_timer, ten_min_timer_led_index, pushbutton_pressed, blink_interrupted
 
@@ -107,7 +114,7 @@ def count_10_min():
     if (ten_min_timer % 60) == 0:
         if ten_min_timer_led_index == 10:
             pushbutton_pressed = 0
-            blink_and_beep(60)
+            blink_and_beep(15)
             if blink_interrupted == 1:
                 blink_interrupted = 0
                 return
@@ -135,6 +142,22 @@ def button_callback(push_button):
 set_neopixel_color(0,0,0)
 push_button.irq(trigger=Pin.IRQ_FALLING, handler=button_callback)
 
+green = (0, 255, 0)
+green = set_neopixel_brightness(green)
+led_strip[0] = green
+led_strip[2] = green
+led_strip[4] = green
+led_strip[6] = green
+led_strip[8] = green
+led_strip.write()
+
+led_state = False
 while True:
     count_10_min()
     time.sleep(1)
+    if led_state:
+        led.low()
+        led_state = False
+    else:
+        led.high()
+        led_state = True

SW/RPi_Pico_Reader/NFC_PN532.py

@@ -406,4 +406,3 @@ class PN532:
             _COMMAND_INDATAEXCHANGE, params=params, response_length=1
         )
         return response[0] == 0x00
-